Next Gen Smart Charger from the front, on a marble wall

Next Gen Smart Charger

One smart charger, set up for your home. Choose your supply, charging power, cable and whether you want a display. Every Next Gen comes with its own cable, an RGB status light, Wi-Fi app control and dynamic load balancing.

AC charging
7.2 kW
Type 2 cable
4 m
Rain and dust sealed
IP65
Hardware warranty
3 yrs
Your home’s supply

Not sure which you have? We check during the free site survey.

Charging power
Charging cable

The cable is fixed to the charger. Choose Type 1 or Type 2 to match your car’s inlet.

Display

Your Next Gen

7.2 kW, single-phase, Type 2 cable, with display

We quote for your configuration after a free site survey. Standard installation is free.

See full specifications
Next Gen Smart Charger from the front

Scroll to look at each part up close.

Next Gen Smart Charger on a wall with its cable plugged into a car

Charging at home, day to day

  1. 1

    Plug in

    Unwind the charger’s cable and plug it into your car.

  2. 2

    Charge on your schedule

    Start straight away, or schedule it in the app to charge overnight when electricity is cheaper.

  3. 3

    Check progress

    The RGB light shows the status at a glance, and the chargeNET app shows the live details.

Choosing your power

Your car charges at whichever is lower: the charger’s power or the most your car accepts on AC. Check your car’s AC charging limit before choosing 11 or 22 kW.

  • 3.6 kW

    Supply
    Single-phase
    Range added per hour
    About 22 km
    Good for
    Overnight top-ups on a lighter supply
  • 7.2 kW

    Selected
    Supply
    Single-phase
    Range added per hour
    About 43 km
    Good for
    A full charge overnight for most cars
  • 11 kW

    Supply
    Three-phase
    Range added per hour
    About 66 km
    Good for
    Faster charging on a three-phase supply
  • 22 kW

    Supply
    Three-phase
    Range added per hour
    About 132 km
    Good for
    Cars that can take 22 kW on AC

Range figures are estimates at about 6 km per kWh. Your car may use more or less.

EV charging connectors side by side: CCS2, Type 2 and Type 1CCS2Type 2Type 1

Will it plug into my car?

The Next Gen comes with its own cable, so you choose the connector when you order. Check which charging inlet your car has:

Type 2
Choose the Type 2 cable. Works at every power.
CCS2
Choose the Type 2 cable. The top half of a CCS2 inlet is a Type 2 inlet.
Type 1
Choose the Type 1 cable, on either supply. Type 1 carries one phase, so these cars charge at up to 7.2 kW.

Installation

Every home is different, so we start by checking yours. Here’s how it works.

  1. 1

    Site survey

    We inspect your main distribution board and supply, confirm the right configuration, and agree where the charger will go.

  2. 2

    Installation

    Our certified team mounts the charger and runs a dedicated, protected circuit to it.

  3. 3

    Set-up

    We configure the charger for your home and show you how to use it.

Standard installation includes

  • Surge protection device against voltage spikes and lightning
  • Double-pole RCBO, so a small earth leakage doesn’t trip your whole home
  • Up to 10 m of armoured cable
  • Wall bracket and on-site configuration

Specifications

Change an option to see how the specs change.

Your configuration

7.2 kW, single-phase, Type 2 cable, with display

Your home’s supply
Charging power
Charging cable
Display

Features

  • Dynamic load balancing with the rest of your home
  • Schedule charging and set the output power in the app
  • Live charging data, history and several users
  • Over-the-air updates and remote diagnostics
  • Type A RCD with 6 mA DC protection built in

Power

Maximum power
7.2 kW
Input supply
Single-phase 230 V AC, ±10%
Input current
32 A
Load management
Dynamic load balancing

Cable and mounting

Charging cable
Type 2 (IEC 62196-2), 4 m
Mounting
Wall mount with built-in cable management

Display and app

Display
5-inch segment display
Status light
Built-in RGB LEDs
Connectivity
Wi-Fi 2.4 GHz
App (iOS and Android)
Set up the charger, start and stop, schedule charging, set the output power, charging history, several users
Live data
Voltage, current, power, energy delivered, temperature inside the charger, average range added
Updates
Over-the-air updates and remote diagnostics

Protection

Built in
Under-voltage, over-voltage, over-current, over-temperature and surge protection
Residual current
Type A RCD with 6 mA DC protection
Over-voltage category
Category III

Build

Water and dust
IP65
Impact
IK10
Operating temperature
−25 °C to 55 °C
Idle power
Under 5 W

Standards

Charging mode
Mode 3, case C
Compliance
IEC 61851-1 / IS 17017 (Part 1), IEC 61851-21-2 / IS 17017 (Part 21), IEC 60529, IEC 62196

Warranty and service

Hardware
3 years
Cable
2 years
Software
Lifetime
Installation
Free standard installation

Talk to us about your Next Gen

You’ve chosen 7.2 kW, single-phase, Type 2 cable, with display. Tell us about your home and your car, and we’ll check your supply and send you a quote.