
Commercial L2 Charger
AC charging for workplaces, hotels, apartments and car parks, in two generations. Choose the generation, your supply, the charging power and the cable that suits the cars at your site.
- AC charging
- 22 kW
- Type 2 cable
- 5 m
- Rain and dust sealed
- IP65
- Hardware warranty
- 3 yrs
Your Commercial L2
Gen 2, 22 kW, three-phase, Type 2 cable, Wi-Fi
Every site is different, so we price the charger and its installation together after a free site survey.
Get to know the Commercial L2
Scroll to look at each part up close, or pick one from the list.

Scroll to look at each part up close.

How drivers charge
- 1
Park and plug in
Drivers take the charger’s own cable and plug it into their car.
- 2
Tap to start
An RFID card or the app starts the charge, so you decide who can charge.
- 3
Charge free or paid
Offer charging as a perk, or set a price per session. Every session shows up in your reports.
Choosing your power
Cars charge at whichever is lower: the charger’s power or the most the car accepts on AC. For long stays, 7.2 kW is usually enough; shorter stays benefit from 11 or 22 kW.
3.6 kW
- Supply
- Single-phase
- Range added per hour
- About 22 km
- Good for
- Staff parking where cars stay all day
7.2 kW
- Supply
- Single-phase
- Range added per hour
- About 43 km
- Good for
- Offices, hotels and apartments with long stays
11 kW
- Supply
- Three-phase
- Range added per hour
- About 66 km
- Good for
- Shopping and dining stops of an hour or two
22 kW
Selected- Supply
- Three-phase
- Range added per hour
- About 132 km
- Good for
- Shorter stays, for cars that accept 22 kW on AC
Range figures are estimates at about 6 km per kWh. Cars may use more or less.
CCS2Type 2Type 1Which cars can charge?
Each charger has its own fixed cable. Choose the connector that suits the cars that park at your site:
- Type 2
- Choose the Type 2 cable. Works at every power.
- CCS2
- Choose the Type 2 cable. The top half of a CCS2 inlet is a Type 2 inlet.
- Type 1
- Choose the Type 1 cable, on either supply. Type 1 carries one phase, so these cars charge at up to 7.2 kW.
Installation
Every site is different, so we start by checking yours. Here’s how it works.
- 1
Site survey
We check your supply and main board, who will charge and for how long, and agree where each charger goes.
- 2
Design
We size the cabling and protection, and plan any supply upgrade your site needs before work starts.
- 3
Installation and commissioning
Our certified team installs and tests each charger, then connects it to the chargeNET network.
- 4
Handover and support
We set up access and pricing, show your team how it all works, and monitor the chargers remotely from then on.
Commercial installation includes
- Surge protection against voltage spikes and lightning
- Double-pole RCBO protection on each charger circuit
- Armoured cabling and wall mounting
- Configuration, testing and connection to the chargeNET network
Specifications
Change an option to see how the specs change.
Your configuration
Gen 2, 22 kW, three-phase, Type 2 cable, Wi-Fi
Features
- Start with an RFID card (MIFARE Classic) or the mobile app
- App on iOS and Android: start and stop, credit top-ups, charging history
- Live data: voltage, current, power and energy delivered
- Over-the-air updates and remote diagnostics
- Type A RCD with 6 mA DC protection built in
Power
- Maximum power
- 22 kW
- Input supply
- Three-phase 230 V AC, ±10%
- Input current
- 32 A
Cable and mounting
- Charging cable
- Type 2 (IEC 62196-2), 5 m
- Mounting
- Wall mount with built-in cable management
Display and access
- Display
- 5-inch segment display
- Status light
- Built-in RGB LEDs
- Access
- RFID (MIFARE Classic) and mobile app
Connectivity and software
- Network
- Wi-Fi 2.4 GHz
- Back-office protocol
- OCPP 1.6J Core, upgradable to 2.0
- App (iOS and Android)
- Start and stop, credit top-ups, charging history
- Live data
- Voltage, current, power and energy delivered
- Updates
- Over-the-air updates and remote diagnostics
Protection
- Built in
- Under-voltage, over-voltage, over-current, over-temperature and surge protection
- Residual current
- Type A RCD with 6 mA DC protection
- Over-voltage category
- Category III
Build
- Water and dust
- IP65
- Impact
- IK10
- Operating temperature
- −25 °C to 55 °C
- Idle power
- Under 5 W
Standards
- Charging mode
- Mode 3, case C
- Compliance
- IEC 61851-1 / IS 17017 (Part 1), IEC 61851-21-2 / IS 17017 (Part 21), IEC 60529, IEC 62196
Warranty and service
- Hardware
- 3 years
- Cable
- 2 years
- Software
- Lifetime
- Installation
- Quoted after a free site survey
Talk to us about the Commercial L2
You’ve chosen Gen 2, 22 kW, three-phase, Type 2 cable, Wi-Fi. Tell us about your site, how many chargers you need and the vehicles that will use them, and we’ll arrange a survey and send you a quote.


