Fast DC Charger Gen 3 at an angle, its backlit logo glowing

Fast DC Charger Gen 3

Our most powerful charger, for highway stops and fleet depots. Each port takes CCS2 or CHAdeMO, on a 5 m retractable cable. At 80 kW, a dual-port charger can charge two cars at once with split power. Choose the power, the ports and the connector on each.

DC output
80 kW
Output voltage
150–1000 V
Retractable cables
5 m
Efficiency
93%+
Charging power
Ports
Charging two cars
Port 1 connector

Match the cars that will use your site. You can mix standards across ports.

Port 2 connector

Your Fast DC Gen 3

80 kW, dual port, CCS2 + CHAdeMO, both at once

Every site is different, so we price the charger and its installation together after a free site survey.

See full specifications
Fast DC Charger Gen 3 from the front

Scroll to look at each part up close.

A driver charging her car at a Fast DC Charger Gen 3

How drivers charge

  1. 1

    Park and plug in

    Drivers take the connector that matches their car. The cable reaches 5 m.

  2. 2

    Tap to start

    An RFID card on the reader or the chargeNET app starts the charge.

  3. 3

    Back on the road

    The display shows progress, and the cable retracts out of the way when it’s put back.

Choosing your power

Cars charge at whichever is lower: the charger’s power or the most the car accepts on DC. At 80 kW, a dual-port charger can charge two cars at once with split power; at 40 kW, it charges one car at a time.

  • 40 kW

    Range added in 30 minutes
    About 120 km
    Two ports
    One car at a time
    Good for
    Dealerships, hotels and workplaces
  • 80 kW

    Selected
    Range added in 30 minutes
    About 240 km
    Two ports
    Both at once, or one at a time
    Good for
    Highway stops, fuel stations and fleet depots

Range figures are estimates at about 6 km per kWh at full power. Cars may use more or less.

Fast DC Charger Gen 3 with two connectors on the floor in front of it

Which connectors do you need?

Each port can have its own connector, so you can match the cars that use your site:

CCS2
The standard on most new electric cars. Most sites choose it for port 1.
CHAdeMO
Used by some Japanese models, such as the Nissan Leaf. Worth adding where these cars are common.

Installation

Every site is different, so we start by checking yours. Here’s how it works.

  1. 1

    Site survey

    We check your supply and main board, who will charge and for how long, and agree where each charger goes.

  2. 2

    Design

    We size the cabling and protection, and plan any supply upgrade your site needs before work starts.

  3. 3

    Installation and commissioning

    Our certified team installs and tests each charger, then connects it to the chargeNET network.

  4. 4

    Handover and support

    We set up access and pricing, show your team how it all works, and monitor the chargers remotely from then on.

Commercial installation includes

  • Surge protection against voltage spikes and lightning
  • Commercial RCBO protection on each charger circuit
  • Armoured cabling and mounting, including a concrete base for floor-standing chargers
  • Configuration, testing and connection to the chargeNET network

Specifications

Change an option to see how the specs change.

Your configuration

80 kW, dual port, CCS2 + CHAdeMO, both at once

Charging power
Ports
Charging two cars
Port 1 connector
Port 2 connector

Features

  • CCS2 or CHAdeMO on each port
  • Two cars at once, with split power
  • Retractable cable management keeps the 5 m cables off the ground
  • Backlit logo
  • Start with the chargeNET app or an RFID card
  • Class 0.5 S energy metering
  • OCPP 1.6J over Wi-Fi or GSM / 4G / LTE

Input

Connection
3-phase + N + PE
Voltage
400 V AC, ±10%
Frequency
50/60 Hz
Current
120 A
Power factor
Over 0.95
Protection
Over-current, residual current (30 mA), over-voltage, over-temperature
Over-voltage category
Type III
Standby power
10 W (super standby)
Pollution degree
2

Output

Power
80 kW
Voltage
150–1000 V DC
Current
Up to 250 A
Efficiency
Over 93% at nominal output
Ports
2, charging at the same time
Protection
DC leakage protection, emergency stop, over-current

Connectors and cable

Port 1
CCS2
Port 2
CHAdeMO
Standards available
CCS Type 2, CHAdeMO
Cable length
5 m
Cable management
Retractable

Display and access

Display
10.1-inch high-brightness colour display
Starting a charge
chargeNET app or RFID card
Energy metering
Class 0.5 S (IEC 62052-22 / IEC 62053-24)
Backlit logo
Yes

Connectivity

Back-office protocol
OCPP 1.6J Core
Network
Wi-Fi 2.4 GHz, GSM / 4G / LTE

Build

Dimensions
2160 × 950 × 410 mm
Operating temperature
−10 °C to 55 °C
Humidity
20% to 95% RH, non-condensing

Service

Installation
Quoted after a free site survey

Talk to us about the Fast DC Gen 3

You’ve chosen 80 kW, dual port, CCS2 + CHAdeMO, both at once. Tell us about your site, how many chargers you need and the vehicles that will use them, and we’ll arrange a survey and send you a quote.